MRVINREACH :: pppLinkStatusPhysicalIndex

MIB Reference — IPNetwork Monitor

All MIBsMRVINREACHpppLinkStatusPhysicalIndex

pppLinkStatusPhysicalIndex

Module: MRVINREACH

OID (symbolic): MRVINREACH::pppLinkStatusPhysicalIndex

OID (numeric): 1.3.6.1.2.1.10.23.1.1.1.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description:

The value of ifIndex that identifies the lower-level interface over which this PPP Link is operating. This interface would usually be an HDLC or RS-232 type of interface. If there is no lower-layer interface element, or there is no ifEntry for the element, or the element can not be identified, then the value of this object is 0. For example, suppose that PPP is operating over a serial port. This would use two entries in the ifTable. The PPP could be running over `interface' number 123 and the serial port could be running over `interface' number 987. Therefore, ifSpecific.123 would contain the OBJECT IDENTIFIER ppp pppLinkStatusPhysicalIndex.123 would contain 987, and ifSpecific.987 would contain the OBJECT IDENTIFIER for the serial-port's media- specific MIB.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.23.1.1.1.1.1
snmpwalk -v2c -c public <target> MRVINREACH::pppLinkStatusPhysicalIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.23.1.1.1.1.1.1
snmpget -v2c -c public <target> MRVINREACH::pppLinkStatusPhysicalIndex.1

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.2mgmtBKTEL-HFC862-BASE-MIB
1.3.6.1.2.1mib_2CHECKPOINT-MIB-2
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.23pppMRVINREACH
1.3.6.1.2.1.10.23.1pppLcpMRVINREACH
1.3.6.1.2.1.10.23.1.1pppLinkMRVINREACH
1.3.6.1.2.1.10.23.1.1.1pppLinkStatusTableMRVINREACH
1.3.6.1.2.1.10.23.1.1.1.1pppLinkStatusEntryMRVINREACH
1.3.6.1.2.1.10.23.1.1.1.1.1pppLinkStatusPhysicalIndexMRVINREACH