All MIBs › MPLS-TE-MIB › mplsTunnelMaxHops
mplsTunnelMaxHops
Module: MPLS-TE-MIB
OID (symbolic): MPLS-TE-MIB::mplsTunnelMaxHops
OID (numeric): 1.3.6.1.3.95.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The maximum number of hops that can be specified for a tunnel on this device.
What is mplsTunnelMaxHops?
Holds the maximum number of hops allowed in an MPLS tunnel path on a device. This defines the deepest tunnel the router can create before rejecting a tunnel request. An operator uses this to verify that tunnel constraints match their network topology and won't unexpectedly block long-path tunnels.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.95.1.4 snmpwalk -v2c -c public <target> MPLS-TE-MIB::mplsTunnelMaxHops
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.95.1.4.1 snmpget -v2c -c public <target> MPLS-TE-MIB::mplsTunnelMaxHops.1
Start monitoring Vendor-neutral IETF standard (MPLS-enabled provider-edge/core router, Traffic Engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-TE-MIB::mplsTunnelMaxHops OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-enabled provider-edge/core router, Traffic Engineering) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.95 | mplsTeMIB | MPLS-TE-MIB |
| 1.3.6.1.3.95.1 | mplsTeScalars | MPLS-TE-MIB |
| 1.3.6.1.3.95.1.4 | mplsTunnelMaxHops | MPLS-TE-MIB |