MPLS-TE-MIB :: mplsTunnelARHopIpv4Addr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMPLS-TE-MIBmplsTunnelARHopIpv4Addr

mplsTunnelARHopIpv4Addr

Module: MPLS-TE-MIB

OID (symbolic): MPLS-TE-MIB::mplsTunnelARHopIpv4Addr

OID (numeric): 1.3.6.1.3.95.2.7.1.4

Node type: OBJECT-TYPE

Type: InetAddressIPv4

Access: read-only

Description: If mplsTunnelARHopAddrType is set to ipV4(1), then this value will contain the IPv4 address of this hop. This object is otherwise insignificant and should contain a value of 0.

What is mplsTunnelARHopIpv4Addr?

The actual IPv4 address the signaling protocol reported for this hop, meaningful only when mplsTunnelARHopAddrType is ipV4; this is the real route the tunnel took, which may differ from the requested explicit route in mplsTunnelHopTable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.3.95.2.7.1.4
snmpwalk -v2c -c public <target> MPLS-TE-MIB::mplsTunnelARHopIpv4Addr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.3.95.2.7.1.4.1
snmpget -v2c -c public <target> MPLS-TE-MIB::mplsTunnelARHopIpv4Addr.1

Start monitoring Vendor-neutral IETF standard (MPLS-enabled provider-edge/core router, Traffic Engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-TE-MIB::mplsTunnelARHopIpv4Addr OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-enabled provider-edge/core router, Traffic Engineering) from a single console.

OID Breakdown

Upper-level ancestors (5 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.3experimentalAXON-MIB
Numeric OIDNameModule
1.3.6.1.3.95mplsTeMIBMPLS-TE-MIB
1.3.6.1.3.95.2mplsTeObjectsMPLS-TE-MIB
1.3.6.1.3.95.2.7mplsTunnelARHopTableMPLS-TE-MIB
1.3.6.1.3.95.2.7.1mplsTunnelARHopEntryMPLS-TE-MIB
1.3.6.1.3.95.2.7.1.4mplsTunnelARHopIpv4AddrMPLS-TE-MIB