All MIBs › MPLS-TE-MIB › mplsTunnelARHopAsNumber
mplsTunnelARHopAsNumber
Module: MPLS-TE-MIB
OID (symbolic): MPLS-TE-MIB::mplsTunnelARHopAsNumber
OID (numeric): 1.3.6.1.3.95.2.7.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: If mplsTunnelARHopAddrType is set to asNumber(3), then this value will contain the AS number of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
What is mplsTunnelARHopAsNumber?
The AS number the signaling protocol reported for this actual-route hop, meaningful only when mplsTunnelARHopAddrType is asNumber; used for hops described at the autonomous-system level rather than by IP address.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.95.2.7.1.8 snmpwalk -v2c -c public <target> MPLS-TE-MIB::mplsTunnelARHopAsNumber
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.95.2.7.1.8.1 snmpget -v2c -c public <target> MPLS-TE-MIB::mplsTunnelARHopAsNumber.1
Start monitoring Vendor-neutral IETF standard (MPLS-enabled provider-edge/core router, Traffic Engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-TE-MIB::mplsTunnelARHopAsNumber OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-enabled provider-edge/core router, Traffic Engineering) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.95 | mplsTeMIB | MPLS-TE-MIB |
| 1.3.6.1.3.95.2 | mplsTeObjects | MPLS-TE-MIB |
| 1.3.6.1.3.95.2.7 | mplsTunnelARHopTable | MPLS-TE-MIB |
| 1.3.6.1.3.95.2.7.1 | mplsTunnelARHopEntry | MPLS-TE-MIB |
| 1.3.6.1.3.95.2.7.1.8 | mplsTunnelARHopAsNumber | MPLS-TE-MIB |