MPLS-LDP-MIB :: mplsLdpSessionRejectedNoHelloErrors

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMPLS-LDP-MIBmplsLdpSessionRejectedNoHelloErrors

mplsLdpSessionRejectedNoHelloErrors

Module: MPLS-LDP-MIB

OID (symbolic): MPLS-LDP-MIB::mplsLdpSessionRejectedNoHelloErrors

OID (numeric): 1.3.6.1.4.1.9.10.65.1.2.6.1.2

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: A count of the Session Rejected/No Hello Error Notification Messages sent or received by this LDP Entity.

What is mplsLdpSessionRejectedNoHelloErrors?

Counts Session Rejected/No Hello Error notification messages sent or received by this entity, which occur when a session setup is attempted without a prior Hello exchange establishing the adjacency. Admins investigate a rising count here as evidence of an LDP peer misconfiguration or an out-of-spec implementation attempting to skip discovery.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.65.1.2.6.1.2
snmpwalk -v2c -c public <target> MPLS-LDP-MIB::mplsLdpSessionRejectedNoHelloErrors

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.65.1.2.6.1.2.1
snmpget -v2c -c public <target> MPLS-LDP-MIB::mplsLdpSessionRejectedNoHelloErrors.1

Start monitoring Vendor-neutral IETF standard (MPLS-capable router/label switch router, LDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-LDP-MIB::mplsLdpSessionRejectedNoHelloErrors OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-capable router/label switch router, LDP) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.65mplsLdpMIBMPLS-LDP-MIB
1.3.6.1.4.1.9.10.65.1mplsLdpObjectsMPLS-LDP-MIB
1.3.6.1.4.1.9.10.65.1.2mplsLdpEntityObjectsMPLS-LDP-MIB
1.3.6.1.4.1.9.10.65.1.2.6mplsLdpEntityStatsTableMPLS-LDP-MIB
1.3.6.1.4.1.9.10.65.1.2.6.1mplsLdpEntityStatsEntryMPLS-LDP-MIB
1.3.6.1.4.1.9.10.65.1.2.6.1.2mplsLdpSessionRejectedNoHelloErrorsMPLS-LDP-MIB