All MIBs › MPLS-LDP-MIB › mplsLdpSessionDiscontinuityTime
mplsLdpSessionDiscontinuityTime
Module: MPLS-LDP-MIB
OID (symbolic): MPLS-LDP-MIB::mplsLdpSessionDiscontinuityTime
OID (numeric): 1.3.6.1.4.1.9.10.65.1.3.3.2.1.5
Node type: OBJECT-TYPE
Type: TimeStamp
Access: read-only
Description: The value of sysUpTime on the most recent occasion at which any one or more of this session's counters suffered a discontinuity. The relevant counters are the specific instances associated with this session of any Counter32 or Counter64 object contained in the mplsLdpSessionStatsTable. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
Also, an NMS can distinguish when a session between a given Entity and Peer goes away and then is 're-established'. This value would change and thus indicate to the NMS that this is a different session.
What is mplsLdpSessionDiscontinuityTime?
Reports the value of sysUpTime at the last discontinuity in this session's statistics counters, or when the session itself was re-established; a changed value tells an NMS this is effectively a new session rather than a continuation. Admins use this to avoid misreading a session restart as a continuous long-lived session when comparing counter deltas over time.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.65.1.3.3.2.1.5 snmpwalk -v2c -c public <target> MPLS-LDP-MIB::mplsLdpSessionDiscontinuityTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.65.1.3.3.2.1.5.1 snmpget -v2c -c public <target> MPLS-LDP-MIB::mplsLdpSessionDiscontinuityTime.1
Start monitoring Vendor-neutral IETF standard (MPLS-capable router/label switch router, LDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-LDP-MIB::mplsLdpSessionDiscontinuityTime OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-capable router/label switch router, LDP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.65 | mplsLdpMIB | MPLS-LDP-MIB |
| 1.3.6.1.4.1.9.10.65.1 | mplsLdpObjects | MPLS-LDP-MIB |
| 1.3.6.1.4.1.9.10.65.1.3 | mplsLdpEntityPeerObjects | MPLS-LDP-MIB |
| 1.3.6.1.4.1.9.10.65.1.3.3 | mplsLdpSessionObjects | MPLS-LDP-MIB |
| 1.3.6.1.4.1.9.10.65.1.3.3.2 | mplsLdpSessionTable | MPLS-LDP-MIB |
| 1.3.6.1.4.1.9.10.65.1.3.3.2.1 | mplsLdpSessionEntry | MPLS-LDP-MIB |
| 1.3.6.1.4.1.9.10.65.1.3.3.2.1.5 | mplsLdpSessionDiscontinuityTime | MPLS-LDP-MIB |