All MIBs › MPLS-LDP-MIB › mplsLdpPeerLoopDetectionForPV
mplsLdpPeerLoopDetectionForPV
Module: MPLS-LDP-MIB
OID (symbolic): MPLS-LDP-MIB::mplsLdpPeerLoopDetectionForPV
OID (numeric): 1.3.6.1.4.1.9.3.65.1.3.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
An indication of whether loop detection based on path vectors is disabled or enabled for this Peer.
If this object has a value of disabled(0), then loop detection is disabled. Otherwise, if this object has a value of enabled(1), then loop detection based on path vectors is enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.3.65.1.3.1.1.3 snmpwalk -v2c -c public <target> MPLS-LDP-MIB::mplsLdpPeerLoopDetectionForPV
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.3.65.1.3.1.1.3.1 snmpget -v2c -c public <target> MPLS-LDP-MIB::mplsLdpPeerLoopDetectionForPV.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.3 | ciscoExperiment | CISCO-SMI |
| 1.3.6.1.4.1.9.3.65 | mplsLdpMIB | MPLS-LDP-MIB |
| 1.3.6.1.4.1.9.3.65.1 | mplsLdpObjects | MPLS-LDP-MIB |
| 1.3.6.1.4.1.9.3.65.1.3 | mplsLdpEntityPeerObjects | MPLS-LDP-MIB |
| 1.3.6.1.4.1.9.3.65.1.3.1 | mplsLdpEntityPeerTable | MPLS-LDP-MIB |
| 1.3.6.1.4.1.9.3.65.1.3.1.1 | mplsLdpEntityPeerEntry | MPLS-LDP-MIB |
| 1.3.6.1.4.1.9.3.65.1.3.1.1.3 | mplsLdpPeerLoopDetectionForPV | MPLS-LDP-MIB |