MPLS-CEM-MIB :: mplsCemVcPerfPktsOoseq

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › MPLS-CEM-MIB › mplsCemVcPerfPktsOoseq

mplsCemVcPerfPktsOoseq

Module: MPLS-CEM-MIB

OID (symbolic): MPLS-CEM-MIB::mplsCemVcPerfPktsOoseq

OID (numeric): 1.3.6.1.3.9999.1.3.1.12

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: Number of packets detected out of sequence (via CEM header sequence numbers), but were able to be re-sequenced. That is, the differential in sequence numbers was less than the jitter buffer depth. Note: some implementations may not support this feature (see mplsCemVcPktResequence). Any packets so far out of sequence that a re-sequencer can not correct for would be counted as missing packet.

What is mplsCemVcPerfPktsOoseq?

A counter of packets that arrived out of sequence but were small enough a gap (within the jitter buffer depth) to be successfully re-ordered; packets too far out of order to correct are instead counted under mplsCemVcPerfMissingPkts.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.3.9999.1.3.1.12
snmpwalk -v2c -c public <target> MPLS-CEM-MIB::mplsCemVcPerfPktsOoseq

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.3.9999.1.3.1.12.1
snmpget -v2c -c public <target> MPLS-CEM-MIB::mplsCemVcPerfPktsOoseq.1

Start monitoring MPLS edge routers and circuit emulation gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-CEM-MIB::mplsCemVcPerfPktsOoseq OID value, configure state conditions and alerts, and monitor any MPLS edge routers and circuit emulation gateways from a single console.

OID Breakdown

Upper-level ancestors (5 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.3experimentalAPERTUS-NPG-MIB
Numeric OIDNameModule
1.3.6.1.3.9999mplsCemMIBMPLS-CEM-MIB
1.3.6.1.3.9999.1mplsCemObjectsMPLS-CEM-MIB
1.3.6.1.3.9999.1.3mplsCemVcPerfTableMPLS-CEM-MIB
1.3.6.1.3.9999.1.3.1mplsCemVcPerfEntryMPLS-CEM-MIB
1.3.6.1.3.9999.1.3.1.12mplsCemVcPerfPktsOoseqMPLS-CEM-MIB