All MIBs › MIOX25-MIB › mioxPleDefaultPeerId
mioxPleDefaultPeerId
Module: MIOX25-MIB
OID (symbolic): MIOX25-MIB::mioxPleDefaultPeerId
OID (numeric): 1.3.6.1.2.1.10.38.1.1.1.16
Node type: OBJECT-TYPE
Type: InstancePointer
Access: read-write
Description: This identifies the instance of the index in the mioxPeerTable for the default parameters to use with this interface.
The entry identified by this object may have a zero length Encapsulation address and a zero length X.121 address.
These default parameters are used with connections to hosts that do not have entries in the mioxPeerTable. Such connections occur when using ddn-x25 IP-X.25 address mapping or when accepting connections from other hosts not in the mioxPeerTable.
The mioxPeerEncTable entry with the same index as the mioxPeerTable entry specifies the call encapsulation types this PLE will accept for peers not in the mioxPeerTable. If the mioxPeerEncTable doesn't contain any entries, this PLE will not accept calls from entries not in the mioxPeerTable.
What is mioxPleDefaultPeerId?
Points to the index in the peer table holding the default parameters this interface uses for connections to hosts not otherwise listed in the peer table, e.g. when accepting inbound calls from unknown peers.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.38.1.1.1.16 snmpwalk -v2c -c public <target> MIOX25-MIB::mioxPleDefaultPeerId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.38.1.1.1.16.1 snmpget -v2c -c public <target> MIOX25-MIB::mioxPleDefaultPeerId.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.38.1.1.1.16.1 s <value>
Start monitoring Legacy WAN router with X.25 interconnect interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MIOX25-MIB::mioxPleDefaultPeerId OID value, configure state conditions and alerts, and monitor any Legacy WAN router with X.25 interconnect interfaces from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.38 | miox | MIOX25-MIB |
| 1.3.6.1.2.1.10.38.1 | mioxPle | MIOX25-MIB |
| 1.3.6.1.2.1.10.38.1.1 | mioxPleTable | MIOX25-MIB |
| 1.3.6.1.2.1.10.38.1.1.1 | mioxPleEntry | MIOX25-MIB |
| 1.3.6.1.2.1.10.38.1.1.1.16 | mioxPleDefaultPeerId | MIOX25-MIB |