MIOX25-MIB :: mioxPeerEncType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › MIOX25-MIB › mioxPeerEncType

mioxPeerEncType

Module: MIOX25-MIB

OID (symbolic): MIOX25-MIB::mioxPeerEncType

OID (numeric): 1.3.6.1.2.1.10.38.2.2.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The value of the encapsulation type. For IP encapsulation this will have a value of 204 (hex CC). For SNAP encapsulated packets, this will have a value of 128 (hex 80). For CLNP, ISO 8473, this will have a value of 129 (hex 81). For ES-ES, ISO 9542, this will have a value of 130 (hex 82). A value of 197 (hex C5) identifies the Blacker X.25 encapsulation. A value of 0, identifies the Null encapsulation.

This value can only be written when the mioxPeerStatus object with the same mioxPeerIndex has a value of underCreation. Setting this object to a value of 256 deletes the entry. When deleting an entry, all other entries in the mioxPeerEncTable with the same mioxPeerIndex and with an mioxPeerEncIndex higher then the deleted entry, will all have their mioxPeerEncIndex values decremented by one.

What is mioxPeerEncType?

The encapsulation type value accepted for this peer, e.g. 204 (0xCC) for IP, 128 (0x80) for SNAP, 129 (0x81) for CLNP, 130 (0x82) for ES-ES, or 197 (0xC5) for Blacker X.25; setting it to 256 deletes the entry.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.38.2.2.1.2
snmpwalk -v2c -c public <target> MIOX25-MIB::mioxPeerEncType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.38.2.2.1.2.1
snmpget -v2c -c public <target> MIOX25-MIB::mioxPeerEncType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.38.2.2.1.2.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mioxPeerEncType.1

Start monitoring Legacy WAN router with X.25 interconnect interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MIOX25-MIB::mioxPeerEncType OID value, configure state conditions and alerts, and monitor any Legacy WAN router with X.25 interconnect interfaces from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.38mioxMIOX25-MIB
1.3.6.1.2.1.10.38.2mioxPeerMIOX25-MIB
1.3.6.1.2.1.10.38.2.2mioxPeerEncTableMIOX25-MIB
1.3.6.1.2.1.10.38.2.2.1mioxPeerEncEntryMIOX25-MIB
1.3.6.1.2.1.10.38.2.2.1.2mioxPeerEncTypeMIOX25-MIB