All MIBs › MICROSEMI-PDSINE-MIB › portMaxPower
portMaxPower
Module: MICROSEMI-PDSINE-MIB
OID (symbolic): MICROSEMI-PDSINE-MIB::portMaxPower
OID (numeric): 1.3.6.1.4.1.7428.1.2.1.1.1.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Read/Write maximum power consumption that PD device may consume in Watts NOTE: 1. For Midspan 60xx,60xxG,6500 series, Max PD power consumption = 17Watt 2. For Midspan 70xxG series, Max PD power consumption = 30Watt 3 .For Midspan 80xx series, this parameter is read-only !! 4. For Midspan 90xxG series, Max PD power consumption = 30/36Watt 5. For Midspan 95xxG series, Max PD power consumption = 60/72Watt (four pair) or 30/36Watt (two pair) 6. For Midspan 55xxG series, Max PD power consumption = 30/36Watt
What is portMaxPower?
This object sets the maximum power, in watts from 1 to 99, that a powered device on this port is allowed to consume, with the description noting the actual usable ceiling and read-only status varies by Midspan model series (for example 17W max on 60xx series, 30W on 70xxG series, and read-only on 80xx series). Admins configure this per port to cap how much power a connected PD can draw, protecting the midspan's overall power budget. For example, an admin on a 90xxG series unit might set this to 30 watts to accommodate a high-power PTZ camera, while being aware that on an 80xx series unit this field would be read-only instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7428.1.2.1.1.1.4 snmpwalk -v2c -c public <target> MICROSEMI-PDSINE-MIB::portMaxPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7428.1.2.1.1.1.4.1 snmpget -v2c -c public <target> MICROSEMI-PDSINE-MIB::portMaxPower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7428.1.2.1.1.1.4.1 i <value>
Start monitoring Microsemi PoE Power Sourcing Equipment (PSE) line card/midspan with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MICROSEMI-PDSINE-MIB::portMaxPower OID value, configure state conditions and alerts, and monitor any Microsemi PoE Power Sourcing Equipment (PSE) line card/midspan from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7428 | polPowerOverLan | MICROSEMI-PDSINE-MIB |
| 1.3.6.1.4.1.7428.1 | products | MICROSEMI-PDSINE-MIB |
| 1.3.6.1.4.1.7428.1.2 | pseDevice | MICROSEMI-PDSINE-MIB |
| 1.3.6.1.4.1.7428.1.2.1 | portObjects | MICROSEMI-PDSINE-MIB |
| 1.3.6.1.4.1.7428.1.2.1.1 | portTable | MICROSEMI-PDSINE-MIB |
| 1.3.6.1.4.1.7428.1.2.1.1.1 | portEntry | MICROSEMI-PDSINE-MIB |
| 1.3.6.1.4.1.7428.1.2.1.1.1.4 | portMaxPower | MICROSEMI-PDSINE-MIB |