All MIBs › MICROCOM-MBR-MIB › mbrCtrlCmd
mbrCtrlCmd
Module: MICROCOM-MBR-MIB
OID (symbolic): MICROCOM-MBR-MIB::mbrCtrlCmd
OID (numeric): 1.3.6.1.4.1.102.1.1.4.3
Node type: OBJECT-TYPE
Type: Counter
Access: read-write
Description: Writing this object causes an action to be taken by the MBR. The action taken corresponds to the value submitted by the manager. Control commands consist of the following values:
-verifyPassword(1): compares mbrCtrlPasswd to mbrSysPasswd. If exact match, then mbrCtrlRequester is copied to mbrSessPartner and control session is established.
-systemBoot(2): initiates a system boot if control session is active.
-requestDownload(3): performs a file operation on mbrDlFileName. The operation is specified by mbrCtrlParm.
-clearAlarms(4): clears the MBR alarm table.
-clearStats(5): resets the statistics on the MBR port corresponding to mbrCtrlPort.
-updateConfig(8): This command causes mbrCurCfgStr to copied into mbrArchCfgStr and saves mbrCurCfgStr to the MBR's disk. Use this command after writing a new mbrCurCfgStr.
What is mbrCtrlCmd?
Writing to this object triggers an MBR action such as verifyPassword(1) to open a control session, systemBoot(2) to reboot the unit, requestDownload(3) to start a file transfer, clearAlarms(4), clearStats(5) on the port set in mbrCtrlPort, or updateConfig(8) to persist a newly written mbrCurCfgStr — a control session must generally be active first.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.102.1.1.4.3 snmpwalk -v2c -c public <target> MICROCOM-MBR-MIB::mbrCtrlCmd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.102.1.1.4.3.1 snmpget -v2c -c public <target> MICROCOM-MBR-MIB::mbrCtrlCmd.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.102.1.1.4.3.1 i <value>
Start monitoring Microcom MBR-series WAN router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MICROCOM-MBR-MIB::mbrCtrlCmd OID value, configure state conditions and alerts, and monitor any Microcom MBR-series WAN router from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.102 | mnpi | MICROCOM-MBR-MIB |
| 1.3.6.1.4.1.102.1 | mbr | MICROCOM-MBR-MIB |
| 1.3.6.1.4.1.102.1.1 | mbrSystem | MICROCOM-MBR-MIB |
| 1.3.6.1.4.1.102.1.1.4 | mbrSysControl | MICROCOM-MBR-MIB |
| 1.3.6.1.4.1.102.1.1.4.3 | mbrCtrlCmd | MICROCOM-MBR-MIB |