MICOMIPRIP-MIB :: nvmIpRipDfltRtEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMICOMIPRIP-MIBnvmIpRipDfltRtEnable

nvmIpRipDfltRtEnable

Module: MICOMIPRIP-MIB

OID (symbolic): MICOMIPRIP-MIB::nvmIpRipDfltRtEnable

OID (numeric): 1.3.6.1.4.1.335.1.4.5.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: NAME = ; DESC = This value determines if this unit should \ act as default Router.; HELP = ; CAPABILITIES = NET_CFG, VPN_CFG;

What is nvmIpRipDfltRtEnable?

This OID is the configuration setting that determines whether this unit should act as a default router. Admins set this when they want the device to advertise itself as the gateway of last resort for hosts on its local network.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.335.1.4.5.5
snmpwalk -v2c -c public <target> MICOMIPRIP-MIB::nvmIpRipDfltRtEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.335.1.4.5.5.1
snmpget -v2c -c public <target> MICOMIPRIP-MIB::nvmIpRipDfltRtEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.335.1.4.5.5.1 i <value>

Start monitoring MICOM Communications access equipment (RIP/IP addressing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MICOMIPRIP-MIB::nvmIpRipDfltRtEnable OID value, configure state conditions and alerts, and monitor any MICOM Communications access equipment (RIP/IP addressing) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.335micomMICOM-OSCAR-MIB
1.3.6.1.4.1.335.1productsMICOM-OSCAR-MIB
1.3.6.1.4.1.335.1.4micom_oscarMICOM-OSCAR-MIB
Numeric OIDNameModule
1.3.6.1.4.1.335.1.4.5mcmIpMICOMIPRIP-MIB
1.3.6.1.4.1.335.1.4.5.5nvmIpRipDfltRtEnableMICOMIPRIP-MIB