All MIBs › MEGACO-MIB › medGwyGatewayControllerOperStatus
medGwyGatewayControllerOperStatus
Module: MEGACO-MIB
OID (symbolic): MEGACO-MIB::medGwyGatewayControllerOperStatus
OID (numeric): 1.3.6.1.2.1.0.1.1.3.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current operational state of the gateway controller. The standby(3) state indicates that it is in the standby mode and no signalling packets can be passed. If medGwyGatewayControllerAdminStatus is down(2) then medGwyGatewayControllerOperStatus should be down(2). If medGwyGatewayControllerAdminStatus is changed to up(1) then medGwyGatewayControllerOperStatus should change to up(1) if the gateway contoller is ready to transmit and receive signalling traffic; it should remain in the down(2) state if and only if there is a fault that prevents it from going to
the up(1) state
What is medGwyGatewayControllerOperStatus?
Reports this controller's actual operational state, including a standby(3) mode used for redundant controllers that blocks signalling until they take over; it stays down(2) if a fault prevents coming up even after admin status is set to up(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.0.1.1.3.1.5 snmpwalk -v2c -c public <target> MEGACO-MIB::medGwyGatewayControllerOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.0.1.1.3.1.5.1 snmpget -v2c -c public <target> MEGACO-MIB::medGwyGatewayControllerOperStatus.1
Start monitoring Vendor-neutral IETF standard (media gateway/media gateway controller, Megaco/H.248 protocol) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MEGACO-MIB::medGwyGatewayControllerOperStatus OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (media gateway/media gateway controller, Megaco/H.248 protocol) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.0 | dhcp | DHCP-V4-RELAY-MIB |
| 1.3.6.1.2.1.0.1 | inetMRouteMIBObjects | INETMROUTE-STD-MIB |
| 1.3.6.1.2.1.0.1.1 | inetMRoute | INETMROUTE-STD-MIB |
| 1.3.6.1.2.1.0.1.1.3 | inetMRouteNextHopTable | INETMROUTE-STD-MIB |
| 1.3.6.1.2.1.0.1.1.3.1 | inetMRouteNextHopEntry | INETMROUTE-STD-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.0.1.1.3.1.5 | medGwyGatewayControllerOperStatus | MEGACO-MIB |