MEF-UNI-EVC-MIB :: mefServiceNotificationCfgAlarmEnable

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › MEF-UNI-EVC-MIB › mefServiceNotificationCfgAlarmEnable

mefServiceNotificationCfgAlarmEnable

Module: MEF-UNI-EVC-MIB

OID (symbolic): MEF-UNI-EVC-MIB::mefServiceNotificationCfgAlarmEnable

OID (numeric): 1.3.6.1.4.1.15007.2.2.1.7.1

Node type: OBJECT-TYPE

Type: Bits

Access: read-write

Description: This object is a vector of bits that indicates whether a specific notification is enabled.

A bit set to '1' enables the specific notification generation.

A bit set to '0' disables the specific notification.

If a particular alarm is not supported the BIT value of the enable/disable is set to '0'.

bServiceConfigurationAlarm(0) enables/disables mefServiceConfigurationAlarm

The value of this object is persistent (non-volatile) upon reboot.

What is mefServiceNotificationCfgAlarmEnable?

A bit-vector enabling or disabling individual MEF service notifications; setting the bServiceConfigurationAlarm bit to 1 enables the mefServiceConfigurationAlarm notification, and 0 disables it (a bit forced to 0 if the NE doesn't support that alarm at all). The setting persists across a reboot, and no alarms are enabled by default.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15007.2.2.1.7.1
snmpwalk -v2c -c public <target> MEF-UNI-EVC-MIB::mefServiceNotificationCfgAlarmEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.15007.2.2.1.7.1.1
snmpget -v2c -c public <target> MEF-UNI-EVC-MIB::mefServiceNotificationCfgAlarmEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.15007.2.2.1.7.1.1 s <value>

Start monitoring Vendor-neutral MEF standard (carrier Ethernet switch/NID, UNI/EVC management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MEF-UNI-EVC-MIB::mefServiceNotificationCfgAlarmEnable OID value, configure state conditions and alerts, and monitor any Vendor-neutral MEF standard (carrier Ethernet switch/NID, UNI/EVC management) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.15007.2.2mefUniEvcMibMEF-UNI-EVC-MIB
1.3.6.1.4.1.15007.2.2.1mefServiceObjectsMEF-UNI-EVC-MIB
1.3.6.1.4.1.15007.2.2.1.7mefServiceNotificationCfgMEF-UNI-EVC-MIB
1.3.6.1.4.1.15007.2.2.1.7.1mefServiceNotificationCfgAlarmEnableMEF-UNI-EVC-MIB