All MIBs › MEF-UNI-EVC-MIB › mefServiceBwpCfgPerformanceEnable
mefServiceBwpCfgPerformanceEnable
Module: MEF-UNI-EVC-MIB
OID (symbolic): MEF-UNI-EVC-MIB::mefServiceBwpCfgPerformanceEnable
OID (numeric): 1.3.6.1.4.1.15007.2.2.1.4.3.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates whether a performance data set is configured for a specific bandwidth profile. This allows for only specific bandwidth profiles to be monitored if there are limitations in the ME-NE being accessed.
disablePerformanceDataSet(1) A performance data set is enabled for this bandwidth profile enablePerformanceDataSet(2) A performance data set is not enabled for this bandwidth profile.
What is mefServiceBwpCfgPerformanceEnable?
Turns bandwidth-profile-level performance counting on or off for this profile, letting an admin monitor only selected profiles when the device has limited monitoring capacity. Note: the source MIB's own enumeration text under each value is inconsistent with the value names -- it describes disablePerformanceDataSet(1) as enabling data collection and enablePerformanceDataSet(2) as not enabling it, which is almost certainly a copy-paste swap in the DESCRIPTION. Based on the enum names themselves and the object's own summary sentence, disablePerformanceDataSet(1) (the default) turns performance data collection off, and enablePerformanceDataSet(2) turns it on.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.15007.2.2.1.4.3.1.10 snmpwalk -v2c -c public <target> MEF-UNI-EVC-MIB::mefServiceBwpCfgPerformanceEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.15007.2.2.1.4.3.1.10.1 snmpget -v2c -c public <target> MEF-UNI-EVC-MIB::mefServiceBwpCfgPerformanceEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.15007.2.2.1.4.3.1.10.1 i <value>
Start monitoring Vendor-neutral MEF standard (carrier Ethernet switch/NID, UNI/EVC management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MEF-UNI-EVC-MIB::mefServiceBwpCfgPerformanceEnable OID value, configure state conditions and alerts, and monitor any Vendor-neutral MEF standard (carrier Ethernet switch/NID, UNI/EVC management) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.15007.2.2 | mefUniEvcMib | MEF-UNI-EVC-MIB |
| 1.3.6.1.4.1.15007.2.2.1 | mefServiceObjects | MEF-UNI-EVC-MIB |
| 1.3.6.1.4.1.15007.2.2.1.4 | mefServiceBwpAttributes | MEF-UNI-EVC-MIB |
| 1.3.6.1.4.1.15007.2.2.1.4.3 | mefServiceBwpCfgTable | MEF-UNI-EVC-MIB |
| 1.3.6.1.4.1.15007.2.2.1.4.3.1 | mefServiceBwpCfgEntry | MEF-UNI-EVC-MIB |
| 1.3.6.1.4.1.15007.2.2.1.4.3.1.10 | mefServiceBwpCfgPerformanceEnable | MEF-UNI-EVC-MIB |