ME1200-IP-SOURCE-GUARD-MIB :: me1200IpSourceGuardStaticConfigTableRowEditorMacAddress

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ME1200-IP-SOURCE-GUARD-MIB › me1200IpSourceGuardStaticConfigTableRowEditorMacAddress

me1200IpSourceGuardStaticConfigTableRowEditorMacAddress

Module: ME1200-IP-SOURCE-GUARD-MIB

OID (symbolic): ME1200-IP-SOURCE-GUARD-MIB::me1200IpSourceGuardStaticConfigTableRowEditorMacAddress

OID (numeric): 1.3.6.1.4.1.9.9.815.1.64.1.2.4.4

Node type: OBJECT-TYPE

Type: MacAddress

Access: read-write

Description: Assigned MAC Address.

What is me1200IpSourceGuardStaticConfigTableRowEditorMacAddress?

This row-editor field holds the MAC address to pair with the interface, VLAN, and IP address of a static IP source guard entry currently being staged. Because IP Source Guard validates both IP and MAC together, this field ensures the completed static binding won't just check the source IP but also require the correct hardware address. For example, an admin might enter 00:0C:29:AA:BB:CC here so the eventual static rule only lets that specific network card use the staged IP on the staged port and VLAN.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.64.1.2.4.4
snmpwalk -v2c -c public <target> ME1200-IP-SOURCE-GUARD-MIB::me1200IpSourceGuardStaticConfigTableRowEditorMacAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.64.1.2.4.4.1
snmpget -v2c -c public <target> ME1200-IP-SOURCE-GUARD-MIB::me1200IpSourceGuardStaticConfigTableRowEditorMacAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.64.1.2.4.4.1 s <value>

Start monitoring Cisco ME1200 Metro Ethernet switch (IP Source Guard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-IP-SOURCE-GUARD-MIB::me1200IpSourceGuardStaticConfigTableRowEditorMacAddress OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet switch (IP Source Guard) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.815ciscoME1200MIBCISCOME1200-MIB
1.3.6.1.4.1.9.9.815.1me1200SwitchMgmtCISCOME1200-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.815.1.64me1200IpSourceGuardMIBME1200-IP-SOURCE-GUARD-MIB
1.3.6.1.4.1.9.9.815.1.64.1me1200IpSourceGuardMIBObjectsME1200-IP-SOURCE-GUARD-MIB
1.3.6.1.4.1.9.9.815.1.64.1.2me1200IpSourceGuardConfigME1200-IP-SOURCE-GUARD-MIB
1.3.6.1.4.1.9.9.815.1.64.1.2.4me1200IpSourceGuardStaticConfigTableRowEditorME1200-IP-SOURCE-GUARD-MIB
1.3.6.1.4.1.9.9.815.1.64.1.2.4.4me1200IpSourceGuardStaticConfigTableRowEditorMacAddressME1200-IP-SOURCE-GUARD-MIB