ME1200-IP-SOURCE-GUARD-MIB :: me1200IpSourceGuardControlTranslateDynamicToStatic

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ME1200-IP-SOURCE-GUARD-MIB › me1200IpSourceGuardControlTranslateDynamicToStatic

me1200IpSourceGuardControlTranslateDynamicToStatic

Module: ME1200-IP-SOURCE-GUARD-MIB

OID (symbolic): ME1200-IP-SOURCE-GUARD-MIB::me1200IpSourceGuardControlTranslateDynamicToStatic

OID (numeric): 1.3.6.1.4.1.9.9.815.1.64.1.4.1

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: The action to translate all the current dynamic entries to static entries. As this is an action so the value to get is always false(2). Set it to true(1) to do the action.

What is me1200IpSourceGuardControlTranslateDynamicToStatic?

This is a trigger object that, when set to true(1), converts every currently learned dynamic IP source guard binding into a permanent static entry. Admins use it to lock in the bindings the switch has already learned via DHCP snooping so they survive a lease expiration or reboot, rather than reverting to allow-nothing until relearned; reading it always returns false(2) since it is an action, not a stored state. For example, after DHCP clients have populated the dynamic table, an admin sets this object to true(1) to freeze all those bindings as static entries in me1200IpSourceGuardStaticConfigTable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.64.1.4.1
snmpwalk -v2c -c public <target> ME1200-IP-SOURCE-GUARD-MIB::me1200IpSourceGuardControlTranslateDynamicToStatic

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.64.1.4.1.1
snmpget -v2c -c public <target> ME1200-IP-SOURCE-GUARD-MIB::me1200IpSourceGuardControlTranslateDynamicToStatic.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.64.1.4.1.1 s <value>

Start monitoring Cisco ME1200 Metro Ethernet switch (IP Source Guard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-IP-SOURCE-GUARD-MIB::me1200IpSourceGuardControlTranslateDynamicToStatic OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet switch (IP Source Guard) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.815ciscoME1200MIBCISCOME1200-MIB
1.3.6.1.4.1.9.9.815.1me1200SwitchMgmtCISCOME1200-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.815.1.64me1200IpSourceGuardMIBME1200-IP-SOURCE-GUARD-MIB
1.3.6.1.4.1.9.9.815.1.64.1me1200IpSourceGuardMIBObjectsME1200-IP-SOURCE-GUARD-MIB
1.3.6.1.4.1.9.9.815.1.64.1.4me1200IpSourceGuardControlME1200-IP-SOURCE-GUARD-MIB
1.3.6.1.4.1.9.9.815.1.64.1.4.1me1200IpSourceGuardControlTranslateDynamicToStaticME1200-IP-SOURCE-GUARD-MIB