All MIBs › ME1200-ARP-INSPECTION-MIB › me1200ArpInspectionPortConfigMode
me1200ArpInspectionPortConfigMode
Module: ME1200-ARP-INSPECTION-MIB
OID (symbolic): ME1200-ARP-INSPECTION-MIB::me1200ArpInspectionPortConfigMode
OID (numeric): 1.3.6.1.4.1.9.9.815.1.63.1.2.2.1.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Enable/Disable the ARP Inspection per-port functionality. Only when both Global Mode and Port Mode on a given port are enabled, ARP Inspection is enabled on this given port.
What is me1200ArpInspectionPortConfigMode?
This per-port TruthValue enables or disables ARP Inspection on a specific physical port, identified by its logical interface index. ARP Inspection is actually active on a given port only when both the global admin state and this per-port mode are enabled, giving admins granular control over which ports are protected. For example, an admin might enable me1200ArpInspectionPortConfigMode only on untrusted access ports facing end-user devices while leaving trusted uplink ports disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.63.1.2.2.1.2 snmpwalk -v2c -c public <target> ME1200-ARP-INSPECTION-MIB::me1200ArpInspectionPortConfigMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.63.1.2.2.1.2.1 snmpget -v2c -c public <target> ME1200-ARP-INSPECTION-MIB::me1200ArpInspectionPortConfigMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.63.1.2.2.1.2.1 s <value>
Start monitoring Cisco ME1200 Metro Ethernet switch (Dynamic ARP Inspection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-ARP-INSPECTION-MIB::me1200ArpInspectionPortConfigMode OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet switch (Dynamic ARP Inspection) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.63 | me1200ArpInspectionMib | ME1200-ARP-INSPECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.63.1 | me1200ArpInspectionMIBObjects | ME1200-ARP-INSPECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.63.1.2 | me1200ArpInspectionConfig | ME1200-ARP-INSPECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.63.1.2.2 | me1200ArpInspectionPortConfigTable | ME1200-ARP-INSPECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.63.1.2.2.1 | me1200ArpInspectionPortConfigEntry | ME1200-ARP-INSPECTION-MIB |
| 1.3.6.1.4.1.9.9.815.1.63.1.2.2.1.2 | me1200ArpInspectionPortConfigMode | ME1200-ARP-INSPECTION-MIB |