All MIBs › LMP-MIB › lmpCcHelloIntervalDefault
lmpCcHelloIntervalDefault
Module: LMP-MIB
OID (symbolic): LMP-MIB::lmpCcHelloIntervalDefault
OID (numeric): 1.3.6.1.2.1.10.227.1.4
Node type: OBJECT-TYPE
Type: LmpInterval
Access: read-write
Description: This object specifies the default value for the HelloInterval parameter used in the Hello protocol keep-alive phase. It indicates how frequently LMP Hello messages will be sent. It is used as the default value for lmpCcHelloInterval. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot.
What is lmpCcHelloIntervalDefault?
The default HelloInterval, i.e. how frequently LMP Hello keep-alive messages are sent, used to pre-populate lmpCcHelloInterval on new control channels. Admins set this once at the node level rather than configuring the interval separately on every control channel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.227.1.4 snmpwalk -v2c -c public <target> LMP-MIB::lmpCcHelloIntervalDefault
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.227.1.4.1 snmpget -v2c -c public <target> LMP-MIB::lmpCcHelloIntervalDefault.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.227.1.4.1 s <value>
Start monitoring Vendor-neutral IETF standard, RFC 4631 (GMPLS/optical-network router or switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LMP-MIB::lmpCcHelloIntervalDefault OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard, RFC 4631 (GMPLS/optical-network router or switch) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.227 | lmpMIB | LMP-MIB |
| 1.3.6.1.2.1.10.227.1 | lmpObjects | LMP-MIB |
| 1.3.6.1.2.1.10.227.1.4 | lmpCcHelloIntervalDefault | LMP-MIB |