LMP-MIB :: lmpCcHelloDeadIntervalDefaultMax

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › LMP-MIB › lmpCcHelloDeadIntervalDefaultMax

lmpCcHelloDeadIntervalDefaultMax

Module: LMP-MIB

OID (symbolic): LMP-MIB::lmpCcHelloDeadIntervalDefaultMax

OID (numeric): 1.3.6.1.2.1.10.227.1.9

Node type: OBJECT-TYPE

Type: LmpInterval

Access: read-write

Description: This object specifies the default maximum value for the HelloDeadInterval parameter. It is used as a default value for lmpCcHelloDeadIntervalMax. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot.

What is lmpCcHelloDeadIntervalDefaultMax?

The default maximum bound for the negotiated HelloDeadInterval, used to pre-populate lmpCcHelloDeadIntervalMax on new control channels.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.227.1.9
snmpwalk -v2c -c public <target> LMP-MIB::lmpCcHelloDeadIntervalDefaultMax

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.227.1.9.1
snmpget -v2c -c public <target> LMP-MIB::lmpCcHelloDeadIntervalDefaultMax.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.227.1.9.1 s <value>

Start monitoring Vendor-neutral IETF standard, RFC 4631 (GMPLS/optical-network router or switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LMP-MIB::lmpCcHelloDeadIntervalDefaultMax OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard, RFC 4631 (GMPLS/optical-network router or switch) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.227lmpMIBLMP-MIB
1.3.6.1.2.1.10.227.1lmpObjectsLMP-MIB
1.3.6.1.2.1.10.227.1.9lmpCcHelloDeadIntervalDefaultMaxLMP-MIB