All MIBs › LMP-MIB › lmpCcHelloDeadIntervalDefault
lmpCcHelloDeadIntervalDefault
Module: LMP-MIB
OID (symbolic): LMP-MIB::lmpCcHelloDeadIntervalDefault
OID (numeric): 1.3.6.1.2.1.10.227.1.7
Node type: OBJECT-TYPE
Type: LmpInterval
Access: read-write
Description: This object specifies the default HelloDeadInterval parameter to use in the Hello protocol keep-alive phase. It indicates how long a device should wait before declaring the control channel dead. The HelloDeadInterval parameter should be at least three times the value of HelloInterval. It is used as a default value for lmpCcHelloDeadInterval. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot.
What is lmpCcHelloDeadIntervalDefault?
The default HelloDeadInterval, i.e. how long to wait without a Hello before declaring a control channel dead, used to pre-populate lmpCcHelloDeadInterval on new control channels. It should be set to at least three times HelloInterval so that a couple of missed Hellos don't immediately flap the channel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.227.1.7 snmpwalk -v2c -c public <target> LMP-MIB::lmpCcHelloDeadIntervalDefault
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.227.1.7.1 snmpget -v2c -c public <target> LMP-MIB::lmpCcHelloDeadIntervalDefault.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.227.1.7.1 s <value>
Start monitoring Vendor-neutral IETF standard, RFC 4631 (GMPLS/optical-network router or switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LMP-MIB::lmpCcHelloDeadIntervalDefault OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard, RFC 4631 (GMPLS/optical-network router or switch) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.227 | lmpMIB | LMP-MIB |
| 1.3.6.1.2.1.10.227.1 | lmpObjects | LMP-MIB |
| 1.3.6.1.2.1.10.227.1.7 | lmpCcHelloDeadIntervalDefault | LMP-MIB |