All MIBs › LMP-MIB › lmpAdminStatus
lmpAdminStatus
Module: LMP-MIB
OID (symbolic): LMP-MIB::lmpAdminStatus
OID (numeric): 1.3.6.1.2.1.10.227.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The desired operational status of LMP on the node.
Implementations should save the value of this object in persistent memory so that it survives restarts or reboot.
What is lmpAdminStatus?
The desired operational status of LMP (Link Management Protocol, RFC 4204) on this node: up or down. Admins set this to up to enable LMP on the box and down to administratively disable it; implementations persist the value across reboots.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.227.1.1 snmpwalk -v2c -c public <target> LMP-MIB::lmpAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.227.1.1.1 snmpget -v2c -c public <target> LMP-MIB::lmpAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.227.1.1.1 i <value>
Start monitoring Vendor-neutral IETF standard, RFC 4631 (GMPLS/optical-network router or switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LMP-MIB::lmpAdminStatus OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard, RFC 4631 (GMPLS/optical-network router or switch) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.227 | lmpMIB | LMP-MIB |
| 1.3.6.1.2.1.10.227.1 | lmpObjects | LMP-MIB |
| 1.3.6.1.2.1.10.227.1.1 | lmpAdminStatus | LMP-MIB |