LLDP-EXT-PNO-MIB :: lldpXPnoRemPortStatusRT3

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › LLDP-EXT-PNO-MIB › lldpXPnoRemPortStatusRT3

lldpXPnoRemPortStatusRT3

Module: LLDP-EXT-PNO-MIB

OID (symbolic): LLDP-EXT-PNO-MIB::lldpXPnoRemPortStatusRT3

OID (numeric): 1.0.8802.1.1.2.1.5.3791.1.3.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This value represents the status of the corresponding port of the remote system according to RT class 3. A value of off(0) means that there isn't any RT3 capability available for this port. When the port is configured for RT3 mode, but the mode isn't active yet the value will be configured(1). When the port is ready for transmission and reception of RT3 traffic, the port status will be running(4).

What is lldpXPnoRemPortStatusRT3?

Reports the PROFINET RT class 3 (IRT) status of the LLDP neighbor's port on the far end of this link -- off(0), configured(1), up(2), down(3), or running(4) -- letting an admin confirm both ends of a link agree on IRT readiness.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.0.8802.1.1.2.1.5.3791.1.3.1.1.5
snmpwalk -v2c -c public <target> LLDP-EXT-PNO-MIB::lldpXPnoRemPortStatusRT3

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.0.8802.1.1.2.1.5.3791.1.3.1.1.5.1
snmpget -v2c -c public <target> LLDP-EXT-PNO-MIB::lldpXPnoRemPortStatusRT3.1

Start monitoring Vendor-neutral PROFIBUS/PROFINET standard (industrial Ethernet switch/field device) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LLDP-EXT-PNO-MIB::lldpXPnoRemPortStatusRT3 OID value, configure state conditions and alerts, and monitor any Vendor-neutral PROFIBUS/PROFINET standard (industrial Ethernet switch/field device) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.0stdSTART-MIB
1.0.8802iso8802START-MIB
1.0.8802.1ieee802dot1START-MIB
1.0.8802.1.1ieee802dot1mibsSTART-MIB
1.0.8802.1.1.2lldpMIBLLDP-MIB
1.0.8802.1.1.2.1lldpObjectsLLDP-MIB
1.0.8802.1.1.2.1.5lldpExtensionsLLDP-MIB
Numeric OIDNameModule
1.0.8802.1.1.2.1.5.3791lldpXPnoMIBLLDP-EXT-PNO-MIB
1.0.8802.1.1.2.1.5.3791.1lldpXPnoObjectsLLDP-EXT-PNO-MIB
1.0.8802.1.1.2.1.5.3791.1.3lldpXPnoRemoteDataLLDP-EXT-PNO-MIB
1.0.8802.1.1.2.1.5.3791.1.3.1lldpXPnoRemTableLLDP-EXT-PNO-MIB
1.0.8802.1.1.2.1.5.3791.1.3.1.1lldpXPnoRemEntryLLDP-EXT-PNO-MIB
1.0.8802.1.1.2.1.5.3791.1.3.1.1.5lldpXPnoRemPortStatusRT3LLDP-EXT-PNO-MIB