All MIBs › LINKSYS-MIB › statsCrcAlignErrors
statsCrcAlignErrors
Module: LINKSYS-MIB
OID (symbolic): LINKSYS-MIB::statsCrcAlignErrors
OID (numeric): 1.3.6.1.4.1.3955.5.5.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The number of valid-length packets (64 to 1518 bytes inclusive) that had a bad Frame Check Sequence(FCS).
What is statsCrcAlignErrors?
Counts valid-length packets (64 to 1518 bytes) on the sp2 hub segment that had a bad Frame Check Sequence. Rising counts here typically indicate a cabling, connector, or NIC problem on one of the hub's attached devices.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3955.5.5.1.5 snmpwalk -v2c -c public <target> LINKSYS-MIB::statsCrcAlignErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3955.5.5.1.5.1 snmpget -v2c -c public <target> LINKSYS-MIB::statsCrcAlignErrors.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3955.5.5.1.5.1 i <value>
Start monitoring Linksys consumer/SMB router, switch, or access point (root registration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LINKSYS-MIB::statsCrcAlignErrors OID value, configure state conditions and alerts, and monitor any Linksys consumer/SMB router, switch, or access point (root registration) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3955 | linksys | LINKSYS-MIB |
| 1.3.6.1.4.1.3955.5 | etherHub | LINKSYS-MIB |
| 1.3.6.1.4.1.3955.5.5 | sp2Hub | LINKSYS-MIB |
| 1.3.6.1.4.1.3955.5.5.1 | sp2Statistic | LINKSYS-MIB |
| 1.3.6.1.4.1.3955.5.5.1.5 | statsCrcAlignErrors | LINKSYS-MIB |