All MIBs › LINKSYS-MIB › speedSet
speedSet
Module: LINKSYS-MIB
OID (symbolic): LINKSYS-MIB::speedSet
OID (numeric): 1.3.6.1.4.1.3955.5.5.2.2.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is speedSet?
Sets the operating speed mode for this hub port: na(-1), nway(0) for autonegotiation, ether10(1) for forced 10Mbps, or ether100(3) for forced 100Mbps. An admin forces a specific speed here when a connected device's autonegotiation is unreliable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3955.5.5.2.2.5 snmpwalk -v2c -c public <target> LINKSYS-MIB::speedSet
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3955.5.5.2.2.5.1 snmpget -v2c -c public <target> LINKSYS-MIB::speedSet.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3955.5.5.2.2.5.1 i <value>
Start monitoring Linksys consumer/SMB router, switch, or access point (root registration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LINKSYS-MIB::speedSet OID value, configure state conditions and alerts, and monitor any Linksys consumer/SMB router, switch, or access point (root registration) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3955 | linksys | LINKSYS-MIB |
| 1.3.6.1.4.1.3955.5 | etherHub | LINKSYS-MIB |
| 1.3.6.1.4.1.3955.5.5 | sp2Hub | LINKSYS-MIB |
| 1.3.6.1.4.1.3955.5.5.2 | sp2Control | LINKSYS-MIB |
| 1.3.6.1.4.1.3955.5.5.2.2 | sp2CtlEntry | LINKSYS-MIB |
| 1.3.6.1.4.1.3955.5.5.2.2.5 | speedSet | LINKSYS-MIB |