All MIBs › LINKSWITCH-MIB › lsEportTestResult
lsEportTestResult
Module: LINKSWITCH-MIB
OID (symbolic): LINKSWITCH-MIB::lsEportTestResult
OID (numeric): 1.3.6.1.4.1.43.17.13.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: When a test is initiated via lsEportAction, the result of the test is stored in this variable when the test has completed or failed. The value varies by test, is set to one (other) at the start of the test.
What is lsEportTestResult?
Read-only result code (0-255) from the most recent diagnostic test run on this specific port via lsEportAction; set to other(1) when a test starts and updated on completion or failure, with the meaning depending on which test was run.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.17.13.1.13 snmpwalk -v2c -c public <target> LINKSWITCH-MIB::lsEportTestResult
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.17.13.1.13.1 snmpget -v2c -c public <target> LINKSWITCH-MIB::lsEportTestResult.1
Start monitoring LinkSwitch enterprise Ethernet/bridging switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LINKSWITCH-MIB::lsEportTestResult OID value, configure state conditions and alerts, and monitor any LinkSwitch enterprise Ethernet/bridging switch from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.17 | linkSwitch_mib | A3Com-products-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.17.13 | lsEportTable | LINKSWITCH-MIB |
| 1.3.6.1.4.1.43.17.13.1 | lsEportEntry | LINKSWITCH-MIB |
| 1.3.6.1.4.1.43.17.13.1.13 | lsEportTestResult | LINKSWITCH-MIB |