All MIBs › LIEBERT-GP-FLEXIBLE-MIB › lgpFlexibleEntryDecimalPosition
lgpFlexibleEntryDecimalPosition
Module: LIEBERT-GP-FLEXIBLE-MIB
OID (symbolic): LIEBERT-GP-FLEXIBLE-MIB::lgpFlexibleEntryDecimalPosition
OID (numeric): 1.3.6.1.4.1.476.1.42.3.9.30.1.30
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This is a power of ten divider needed to convert values from the signed and unsigned integer columns (lgpFlexibleEntryIntegerValue or lgpFlexibleEntryUnsignedIntegerValue) to floating point values. This essentially tells how many positions to move the decimal point to the left.
To convert the integer values to the units indicated in the units of measure columns (lgpFlexibleEntryUnitsOfMeasure or lgpFlexibleEntryUnitsOfMeasureEnum), divide the integer value by 10^n, where n is the value from this column.
For data points that are writable (as designated by the lgpFlexibleEntryAccessibility column), the inverse calculation must done. The desired value must be multiplied by 10^n before it is written to the signed or unsigned integer columns.
What is lgpFlexibleEntryDecimalPosition?
This read-only Unsigned32 specifies how many decimal places to shift left when converting the raw integer or unsigned-integer value in the same table row into its true scaled reading, and the reverse multiplication is required when writing a new value into those columns. Admins rely on this column to correctly interpret numeric flexible-table data without guessing scale factors, since different data points on the same device may use different precisions. For example, a decimal position of 2 means a stored raw value of 1234 represents an actual reading of 12.34 in the units given by the units-of-measure columns.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.476.1.42.3.9.30.1.30 snmpwalk -v2c -c public <target> LIEBERT-GP-FLEXIBLE-MIB::lgpFlexibleEntryDecimalPosition
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.476.1.42.3.9.30.1.30.1 snmpget -v2c -c public <target> LIEBERT-GP-FLEXIBLE-MIB::lgpFlexibleEntryDecimalPosition.1
Start monitoring Liebert/Vertiv UPS or precision cooling unit (flexible generic object tables) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LIEBERT-GP-FLEXIBLE-MIB::lgpFlexibleEntryDecimalPosition OID value, configure state conditions and alerts, and monitor any Liebert/Vertiv UPS or precision cooling unit (flexible generic object tables) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.476 | emerson | LIEBERT-GP-REGISTRATION-MIB |
| 1.3.6.1.4.1.476.1 | liebertCorp | LIEBERT-GP-REGISTRATION-MIB |
| 1.3.6.1.4.1.476.1.42 | liebertGlobalProducts | LIEBERT-GP-REGISTRATION-MIB |
| 1.3.6.1.4.1.476.1.42.3 | lgpFoundation | LIEBERT-GP-REGISTRATION-MIB |
| 1.3.6.1.4.1.476.1.42.3.9 | lgpFlexible | LIEBERT-GP-REGISTRATION-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.476.1.42.3.9.30 | lgpFlexibleExtendedTable | LIEBERT-GP-FLEXIBLE-MIB |
| 1.3.6.1.4.1.476.1.42.3.9.30.1 | lgpFlexibleExtendedEntry | LIEBERT-GP-FLEXIBLE-MIB |
| 1.3.6.1.4.1.476.1.42.3.9.30.1.30 | lgpFlexibleEntryDecimalPosition | LIEBERT-GP-FLEXIBLE-MIB |