All MIBs › LIEBERT-GP-ENVIRONMENTAL-MIB › lgpEnvControlShutdownAfterDelay
lgpEnvControlShutdownAfterDelay
Module: LIEBERT-GP-ENVIRONMENTAL-MIB
OID (symbolic): LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvControlShutdownAfterDelay
OID (numeric): 1.3.6.1.4.1.476.1.42.3.4.5.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Setting this object will shutdown (i.e., turn off) the system after the indicated number of seconds. Setting this object to 0 will cause the shutdown to occur immediately. Setting this object to -1 will abort the countdown. If the system is already in the desired state at the time the countdown reaches 0, then nothing will happen. When read, lgpEnvControlShutdownAfterDelay will return the number of seconds remaining until shutdown, or -1 if no shutdown countdown is in effect. On some systems, if the agent is restarted while a shutdown countdown is in effect, the countdown may be aborted. Sets to this object override any lgpEnvControlShutdownAfterDelay already in effect.
What is lgpEnvControlShutdownAfterDelay?
Writing a value to this object schedules the system to shut off after that many seconds (0 shuts it down immediately, -1 aborts a pending countdown); reading it returns the seconds remaining until shutdown, or -1 if no countdown is active. Admins use this to schedule a controlled, delayed shutdown, for example to sequence multiple units offline for maintenance rather than cutting cooling abruptly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.476.1.42.3.4.5.1 snmpwalk -v2c -c public <target> LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvControlShutdownAfterDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.476.1.42.3.4.5.1.1 snmpget -v2c -c public <target> LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvControlShutdownAfterDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.476.1.42.3.4.5.1.1 i <value>
Start monitoring Liebert/Vertiv precision cooling unit (CRAC/CRAH) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvControlShutdownAfterDelay OID value, configure state conditions and alerts, and monitor any Liebert/Vertiv precision cooling unit (CRAC/CRAH) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.476 | emerson | LIEBERT-GP-REGISTRATION-MIB |
| 1.3.6.1.4.1.476.1 | liebertCorp | LIEBERT-GP-REGISTRATION-MIB |
| 1.3.6.1.4.1.476.1.42 | liebertGlobalProducts | LIEBERT-GP-REGISTRATION-MIB |
| 1.3.6.1.4.1.476.1.42.3 | lgpFoundation | LIEBERT-GP-REGISTRATION-MIB |
| 1.3.6.1.4.1.476.1.42.3.4 | lgpEnvironmental | LIEBERT-GP-REGISTRATION-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.476.1.42.3.4.5 | lgpEnvControl | LIEBERT-GP-ENVIRONMENTAL-MIB |
| 1.3.6.1.4.1.476.1.42.3.4.5.1 | lgpEnvControlShutdownAfterDelay | LIEBERT-GP-ENVIRONMENTAL-MIB |