All MIBs › LANPLEX-OPT-FDDI-MIB-1-2-2 › lpOptSMTHoldState

lpOptSMTHoldState

OID (symbolic): LANPLEX-OPT-FDDI-MIB-1-2-2::lpOptSMTHoldState

OID (numeric): 1.3.6.1.4.1.114.1.10.1.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This variable indicates the current state of the
Hold function. The value 'not-holding' is the
default and initial value.  The value must be set
to 'not-holding' as part of Active_Actions and
when the conditions causing 'holding-prm' or
'holding-sec' are no longer true. The value
'holding-prm' must be set when the condition
(notTR_Flag & not RE_Flag & (PC_LS=QLS | LEM_Fail
| TNE>NS_Max | (not LS_Flag & TPC > T_Out))) is
satisfied in state PC8:ACTIVE for the A Port. The
value 'holding-sec' must be set when the condition
(notTR_Flag & not RE_Flag & (PC_LS=QLS | LEM_Fail
| TNE>NS_Max | (not LS_Flag & TPC > T_Out))) is
satisfied in state PC8:ACTIVE for the B Port.

What is lpOptSMTHoldState?

Reports whether this FDDI station is currently holding its ring on the primary or secondary port due to a fault condition (holding-prm/holding-sec), not holding, or not supporting the hold function at all; an admin checks this to see if the station is deliberately isolating a failing link.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.114.1.10.1.1.1.4
snmpwalk -v2c -c public <target> LANPLEX-OPT-FDDI-MIB-1-2-2::lpOptSMTHoldState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.114.1.10.1.1.1.4.1
snmpget -v2c -c public <target> LANPLEX-OPT-FDDI-MIB-1-2-2::lpOptSMTHoldState.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> lpOptSMTHoldState.1

Start monitoring LANplex (Synoptics/Bay Networks) FDDI switching hardware with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LANPLEX-OPT-FDDI-MIB-1-2-2::lpOptSMTHoldState OID value, configure state conditions and alerts, and monitor any LANplex (Synoptics/Bay Networks) FDDI switching hardware from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.114	synernetics	A3Com-products-MIB
1.3.6.1.4.1.114.1	lanplex	A3Com-products-MIB
1.3.6.1.4.1.114.1.10	lanplexOptFddi	A3Com-products-MIB
1.3.6.1.4.1.114.1.10.1	lpOptSMT	LANPLEX-OPT-FDDI-MIB-1-1-2
1.3.6.1.4.1.114.1.10.1.1	lpOptSMTTable	LANPLEX-OPT-FDDI-MIB-1-1-2
1.3.6.1.4.1.114.1.10.1.1.1	lpOptSMTEntry	LANPLEX-OPT-FDDI-MIB-1-1-2

Numeric OID	Name	Module
1.3.6.1.4.1.114.1.10.1.1.1.4	lpOptSMTHoldState	LANPLEX-OPT-FDDI-MIB-1-2-2

LANPLEX-OPT-FDDI-MIB-1-2-2 :: lpOptSMTHoldState

lpOptSMTHoldState

Also defined in

Module

This MIB depends on