LANPLEX-MIB-1-2-9 :: lpBridgePortAddressAction

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › LANPLEX-MIB-1-2-9 › lpBridgePortAddressAction

lpBridgePortAddressAction

Module: LANPLEX-MIB-1-2-9

OID (symbolic): LANPLEX-MIB-1-2-9::lpBridgePortAddressAction

OID (numeric): 1.3.6.1.4.1.114.1.1.21.2.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows:

freezeAddress: causes all the learned dynamic addresses to be converted into static addresses.

flushAddress: causes all the addresses to be flushed from the port's address list.

flushDynamicAddress: causes all dynamic addresses to be flushed from the port's address list.

What is lpBridgePortAddressAction?

A remote command object for this port's learned-address table: reading always returns other(1); writing freezeAddress(2) converts learned dynamic addresses to static, flushAddress(3) clears the whole address list, and flushDynamicAddress(4) clears only the dynamic entries.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.114.1.1.21.2.1.8
snmpwalk -v2c -c public <target> LANPLEX-MIB-1-2-9::lpBridgePortAddressAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.114.1.1.21.2.1.8.1
snmpget -v2c -c public <target> LANPLEX-MIB-1-2-9::lpBridgePortAddressAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.114.1.1.21.2.1.8.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> lpBridgePortAddressAction.1

Start monitoring SynOptics/Bay Networks LANplex chassis switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LANPLEX-MIB-1-2-9::lpBridgePortAddressAction OID value, configure state conditions and alerts, and monitor any SynOptics/Bay Networks LANplex chassis switch from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.114synerneticsA3Com-products-MIB
1.3.6.1.4.1.114.1lanplexA3Com-products-MIB
1.3.6.1.4.1.114.1.1lANplex_12_slot_supportA3Com-products-MIB
Numeric OIDNameModule
1.3.6.1.4.1.114.1.1.21lpBridgeLANPLEX-MIB-1-2-9
1.3.6.1.4.1.114.1.1.21.2lpBridgePortTableLANPLEX-MIB-1-2-9
1.3.6.1.4.1.114.1.1.21.2.1lpBridgePortEntryLANPLEX-MIB-1-2-9
1.3.6.1.4.1.114.1.1.21.2.1.8lpBridgePortAddressActionLANPLEX-MIB-1-2-9