All MIBs › L2TV1-MIB › l2tTunnelConnectTestHostName
l2tTunnelConnectTestHostName
Module: L2TV1-MIB
OID (symbolic): L2TV1-MIB::l2tTunnelConnectTestHostName
OID (numeric): 1.3.6.1.4.1.2.6.119.4.7.7.1.1.2
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: The host name used to establish a Layer-2 tunnel.
This object is used to trigger a connectivity test to a specific host. A new test is triggered by SETTING this object using a non-existent index and SETTING l2tTunnelConnectTestStatus to createAndGo. For example to trigger a new connectivity test when the table currently contains row 1 through 4, one would send a SET as follows: SNMP SET l2tTunnelConnectHostName.5 = Host-To-Test l2tTunnelConnectTestStatus.5 = createAndGo See l2tHostName for the possible host names which may be specified.
Existing entries may NOT be modified.
What is l2tTunnelConnectTestHostName?
Read-write host name used to trigger and identify a tunnel connectivity test; an admin creates a new test by SETting this to a target host name on an unused index together with l2tTunnelConnectTestStatus set to createAndGo. Existing entries cannot be modified afterward.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.119.4.7.7.1.1.2 snmpwalk -v2c -c public <target> L2TV1-MIB::l2tTunnelConnectTestHostName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.119.4.7.7.1.1.2.1 snmpget -v2c -c public <target> L2TV1-MIB::l2tTunnelConnectTestHostName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.119.4.7.7.1.1.2.1 s <value>
Start monitoring Network edge device supporting Layer 2 traffic virtualization with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the L2TV1-MIB::l2tTunnelConnectTestHostName OID value, configure state conditions and alerts, and monitor any Network edge device supporting Layer 2 traffic virtualization from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6.119 | ibmIROC | IBMIROCAUTH-MIB |
| 1.3.6.1.4.1.2.6.119.4 | ibmIROCrouting | IBMIROCDIALOUT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.119.4.7 | ibmIROCroutingl2t | L2TV1-MIB |
| 1.3.6.1.4.1.2.6.119.4.7.7 | l2tTests | L2TV1-MIB |
| 1.3.6.1.4.1.2.6.119.4.7.7.1 | l2tTunnelConnectTestTable | L2TV1-MIB |
| 1.3.6.1.4.1.2.6.119.4.7.7.1.1 | l2tTunnelConnectTestEntry | L2TV1-MIB |
| 1.3.6.1.4.1.2.6.119.4.7.7.1.1.2 | l2tTunnelConnectTestHostName | L2TV1-MIB |