All MIBs › Juniper-System-MIB › juniSystemTimingSourceLine
juniSystemTimingSourceLine
Module: Juniper-System-MIB
OID (symbolic): Juniper-System-MIB::juniSystemTimingSourceLine
OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.5.4.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The line type timing source for this entry. If the juniSystemTimingSourceType object is not timingLine(3), then reading this object will return timingSourceLineUndefined(0). The agent will not accept a set to this object unless the juniSystemTimingSourceType object is set to timingLine(3). Attempting to set this object to timingSourceLineUndefined(0) will always return an inconsistantValue error. Attempting to set this object to a value that is not supported on the type of system running the agent will result in an inconsistantValue error.
What is juniSystemTimingSourceLine?
This selects a specific physical line (such as E1 port A/B or T1 port A/B) as this timing-selector entry's clock source, and only takes effect when juniSystemTimingSourceType is set to the line-based type. Setting it to the undefined value, or to a line type the platform doesn't support, is rejected as an inconsistent value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.5.4.1.4 snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemTimingSourceLine
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.5.4.1.4.1 snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemTimingSourceLine.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.2.1.5.4.1.4.1 i <value>
Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemTimingSourceLine OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.2 | juniSystemMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1 | juniSystemObjects | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.5 | juniSystemTiming | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.5.4 | juniSystemTimingSelectorTable | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.5.4.1 | juniSystemTimingSelectorEntry | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.5.4.1.4 | juniSystemTimingSourceLine | Juniper-System-MIB |