Juniper-System-MIB :: juniSystemTempProtectionHoldOffTimeRemaining

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › Juniper-System-MIB › juniSystemTempProtectionHoldOffTimeRemaining

juniSystemTempProtectionHoldOffTimeRemaining

Module: Juniper-System-MIB

OID (symbolic): Juniper-System-MIB::juniSystemTempProtectionHoldOffTimeRemaining

OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.9.7

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The time remaining, in seconds, before the system enters Thermal Protection mode while the ThermalProtectionStatus is set to inHoldOff. The value decrements every second until it reaches zero, and the status changes to activatedHoldOffExpired. When ThermalProtectionStatus is not inHoldOff or activatedHoldOffExpired, the value is set to the hold off time.

What is juniSystemTempProtectionHoldOffTimeRemaining?

This reports, in seconds, how much of the thermal-protection hold-off countdown remains while the system is in the hold-off state, counting down to zero before the status changes to activated. Outside of the hold-off state, it holds the full hold-off time value.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.9.7
snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemTempProtectionHoldOffTimeRemaining

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.9.7.1
snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemTempProtectionHoldOffTimeRemaining.1

Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemTempProtectionHoldOffTimeRemaining OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.2juniSystemMIBJuniper-MIBs
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.2.1juniSystemObjectsJuniper-System-MIB
1.3.6.1.4.1.4874.2.2.2.1.9juniSystemTemperatureJuniper-System-MIB
1.3.6.1.4.1.4874.2.2.2.1.9.7juniSystemTempProtectionHoldOffTimeRemainingJuniper-System-MIB