All MIBs › Juniper-System-MIB › juniSystemRedundancyRevertControl
juniSystemRedundancyRevertControl
Module: Juniper-System-MIB
OID (symbolic): Juniper-System-MIB::juniSystemRedundancyRevertControl
OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.1.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Global control for reverting primary modules back from their active redundant spare modules: off - Disable global reverts of redundant modules. immediate - All redundant module pairs are to revert as soon as the primary module is ready to enter the online state. timeOfDay - All redundant module pairs are to revert at the time specified by juniSystemRevertTimeOfDay, relative to midnight based on the system clock time. This object must be set concurrently with juniSystemRevertTimeOfDay when this value is specified.
Note that this only applies to modules that have juniSystemModuleRedundancySupport set to true(1).
What is juniSystemRedundancyRevertControl?
This globally controls whether primary modules automatically revert back from their active redundant spare once ready: never, immediately, or at a specific time of day set via juniSystemRedundancyRevertTimeOfDay. It only affects module pairs that support redundancy.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.17 snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemRedundancyRevertControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.17.1 snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemRedundancyRevertControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.2.1.1.17.1 i <value>
Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemRedundancyRevertControl OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.2 | juniSystemMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1 | juniSystemObjects | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.1 | juniSystemGeneral | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.1.17 | juniSystemRedundancyRevertControl | Juniper-System-MIB |