Juniper-System-MIB :: juniSystemModuleRedundancyRevertTime

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › Juniper-System-MIB › juniSystemModuleRedundancyRevertTime

juniSystemModuleRedundancyRevertTime

Module: Juniper-System-MIB

OID (symbolic): Juniper-System-MIB::juniSystemModuleRedundancyRevertTime

OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.3.6.1.6

Node type: OBJECT-TYPE

Type: DateAndTime

Access: read-write

Description: The date and time associated with the timeAndDate (delayed) revert operation. Only the local format for DateAndTime is supported. On a set operation, if the time specified is prior to the current time, then an inconsistent value error is returned.This object must be set concurrently with juniSystemModuleRedundancyRevertControl { timeAndDate(2) }.

What is juniSystemModuleRedundancyRevertTime?

This sets the date and time at which a delayed revert-to-primary operation should occur for this module, used when juniSystemModuleRedundancyRevertControl is set to time-and-date. Setting a time earlier than the current time is rejected as an inconsistent value.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.3.6.1.6
snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemModuleRedundancyRevertTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.3.6.1.6.1
snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemModuleRedundancyRevertTime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.2.1.3.6.1.6.1 s <value>

Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemModuleRedundancyRevertTime OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.2juniSystemMIBJuniper-MIBs
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.2.1juniSystemObjectsJuniper-System-MIB
1.3.6.1.4.1.4874.2.2.2.1.3juniSystemModuleJuniper-System-MIB
1.3.6.1.4.1.4874.2.2.2.1.3.6juniSystemModuleRedundancyTableJuniper-System-MIB
1.3.6.1.4.1.4874.2.2.2.1.3.6.1juniSystemModuleRedundancyEntryJuniper-System-MIB
1.3.6.1.4.1.4874.2.2.2.1.3.6.1.6juniSystemModuleRedundancyRevertTimeJuniper-System-MIB