All MIBs › Juniper-System-MIB › juniSystemModuleOperStatus
juniSystemModuleOperStatus
Module: Juniper-System-MIB
OID (symbolic): Juniper-System-MIB::juniSystemModuleOperStatus
OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.3.4.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current operational status of the module (or sub-module): unknown - The status of the module cannot be determined notPresent - No hardware is currently present but there was a module previously configured in this position (see juniSystemModuleExpectedType); juniSystemModuleCurrentType is unknown(0) disabled - Disable for the reason specified in juniSystemModuleDisableReason hardwareError - Not operational due to a hardware failure booting - In the process of booting initializing - In the process of initialing online - Fully operational standby - In redundant standby mode inactive - In redundant inactive mode notResponding - Unable to communicate with the rest of the system
What is juniSystemModuleOperStatus?
This reports the current operational state of a module or sub-module -- unknown, not present, disabled, hardware error, booting, initializing, online, standby, inactive, or not responding. It's the primary field operators poll to check whether a line card or SRP is actually in service.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.3.4.1.1 snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemModuleOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.3.4.1.1.1 snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemModuleOperStatus.1
Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemModuleOperStatus OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.2 | juniSystemMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1 | juniSystemObjects | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3 | juniSystemModule | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3.4 | juniSystemModuleTable | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3.4.1 | juniSystemModuleEntry | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3.4.1.1 | juniSystemModuleOperStatus | Juniper-System-MIB |