All MIBs › Juniper-System-MIB › juniSystemModuleExpectedType
juniSystemModuleExpectedType
Module: Juniper-System-MIB
OID (symbolic): Juniper-System-MIB::juniSystemModuleExpectedType
OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.3.4.1.5
Node type: OBJECT-TYPE
Type: JuniSystemModuleType
Access: read-only
Description: The personality for this module position based on the combination of modules that were inserted in this slot when it was last configured. The value of this object will be different than the value of juniSystemModuleCurrentType when the value of juniSystemModuleOperStatus is disabled(2) and the value of juniSystemModuleDisableReason is typeMismatch(4). After one or more modules is removed from a slot, configuration information associated with the slot (its 'personality') may persist, inhibiting the operation of a different combination of modules in the slot (when new modules are inserted) until juniSystemModuleControl for the slot's primary module is set to flush(1).
What is juniSystemModuleExpectedType?
This reports the module personality the slot was configured for the last time it was set up, which can differ from juniSystemModuleCurrentType after a module swap causes a type mismatch. Configuration tied to the expected personality persists until an operator explicitly flushes it via juniSystemModuleControl.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.3.4.1.5 snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemModuleExpectedType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.3.4.1.5.1 snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemModuleExpectedType.1
Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemModuleExpectedType OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.2 | juniSystemMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1 | juniSystemObjects | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3 | juniSystemModule | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3.4 | juniSystemModuleTable | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3.4.1 | juniSystemModuleEntry | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3.4.1.5 | juniSystemModuleExpectedType | Juniper-System-MIB |