All MIBs › Juniper-System-MIB › juniSystemModuleControl
juniSystemModuleControl
Module: Juniper-System-MIB
OID (symbolic): Juniper-System-MIB::juniSystemModuleControl
OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.3.5.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Administrative control of this slot: noOperation - Setting this value has no effect. flush - Flushes the configuration associated with a module type that previously occupied this slot. Used to explicitly confirm that the slot is now empty, or contains a different card type. The module must be disabled when this value is asserted. See the description for juniSystemModuleDisableReason. reset - Resets the module. resetBackup - Resets the module using the backup release file.
Get operations on this variable always return noOperation. Module types that do not support these operations simply ignore them.
What is juniSystemModuleControl?
This issues an administrative action on the module's slot: no operation, flush (clear stale configuration left by a previous, different card), reset, or reset using the backup release file. Reads always return no-operation, and module types that don't support a requested action simply ignore it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.3.5.1.6 snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemModuleControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.3.5.1.6.1 snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemModuleControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.2.1.3.5.1.6.1 i <value>
Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemModuleControl OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.2 | juniSystemMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1 | juniSystemObjects | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3 | juniSystemModule | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3.5 | juniSystemModuleSoftwareTable | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3.5.1 | juniSystemModuleSoftwareEntry | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3.5.1.6 | juniSystemModuleControl | Juniper-System-MIB |