All MIBs › Juniper-System-MIB › juniSystemModuleBootBackupReleaseFile
juniSystemModuleBootBackupReleaseFile
Module: Juniper-System-MIB
OID (symbolic): Juniper-System-MIB::juniSystemModuleBootBackupReleaseFile
OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.3.5.1.8
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: The backup boot release file name for this slot, with extension '.rel'. If a file name is specified (a non-zero-length string), then this release file takes precedence over the subsystem boot backup release file (juniSystemSubsystemBootBackupReleaseFile) and the system-wide boot backup release file (juniSystemBootBackupReleaseFile) for just the module in this slot.
This object cannot be set unless the system has a backup file, which mean that juniSystemBootBackupReleaseFile must contain a file name (a non-zero-length string). Some module types (e.g., ERX SRP modules) don't allow this object to be set. On a set operation, if there is no file that matches the name specified, then an inconsistentValue error will be returned. Setting this object to a zero-length string deconfigures the slot-specific backup release file.
What is juniSystemModuleBootBackupReleaseFile?
This names a backup boot release file that takes precedence over the subsystem and system-wide backup release files, but only for the module in this slot, and requires the system to already have a system-wide backup release file configured. Some module types don't allow it to be set.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.3.5.1.8 snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemModuleBootBackupReleaseFile
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.3.5.1.8.1 snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemModuleBootBackupReleaseFile.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.2.1.3.5.1.8.1 s <value>
Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemModuleBootBackupReleaseFile OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.2 | juniSystemMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1 | juniSystemObjects | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3 | juniSystemModule | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3.5 | juniSystemModuleSoftwareTable | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3.5.1 | juniSystemModuleSoftwareEntry | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.3.5.1.8 | juniSystemModuleBootBackupReleaseFile | Juniper-System-MIB |