All MIBs › Juniper-System-MIB › juniSystemHighMemUtilThreshold
juniSystemHighMemUtilThreshold
Module: Juniper-System-MIB
OID (symbolic): Juniper-System-MIB::juniSystemHighMemUtilThreshold
OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The value of memory utilization in the primary system processor, where, if reached for the first time after a high memory threshold reset, a high memory utilization event notification will be sent to the management entity on this system. A high memory threshold reset occurs when the system is initialized (booted) or the memory utilization falls below the value in juniSystemAbatedMemUtilThreshold.
The value of this object must always be greater than the value of juniSystemAbatedMemUtilThreshold.
What is juniSystemHighMemUtilThreshold?
This sets the memory-utilization percentage that, once reached after a threshold reset, triggers a high-memory-utilization event notification to the management station. Its value must always exceed juniSystemAbatedMemUtilThreshold, and it defaults to 85 percent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.5 snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemHighMemUtilThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.5.1 snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemHighMemUtilThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.2.1.1.5.1 i <value>
Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemHighMemUtilThreshold OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.2 | juniSystemMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1 | juniSystemObjects | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.1 | juniSystemGeneral | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.1.5 | juniSystemHighMemUtilThreshold | Juniper-System-MIB |