All MIBs › Juniper-System-MIB › juniSystemBootConfigControl
juniSystemBootConfigControl
Module: Juniper-System-MIB
OID (symbolic): Juniper-System-MIB::juniSystemBootConfigControl
OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: System boot configuration control: file - On a system reboot use the configuration settings specified by the juniSystemBootConfigFile. The juniSystemBootConfigControl and juniSystemBootConfigFile must be specified together in the same set request PDU. fileOnce - On the next system reboot use the configuration settings specified by the juniSystemBootConfigFile. Do not continue to use this file after using it once; on subsequent reboots use the running configuration. The juniSystemBootConfigControl and juniSystemBootConfigFile must be specified together in the same set request PDU. factoryDefaults - On the next system reboot use the factory default settings. On subsequent reboots use the running configuration. runningConfiguration - On a system reboot use the current configuration settings.
What is juniSystemBootConfigControl?
This controls which configuration the system loads on its next reboot: a named file (persistently or just once), factory defaults, or the currently running configuration. Administrators set this together with juniSystemBootConfigFile when specifying 'file' or 'fileOnce' so the router boots from a specific saved configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.7 snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemBootConfigControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.7.1 snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemBootConfigControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.2.1.1.7.1 i <value>
Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemBootConfigControl OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.2 | juniSystemMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1 | juniSystemObjects | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.1 | juniSystemGeneral | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.1.7 | juniSystemBootConfigControl | Juniper-System-MIB |