All MIBs › Juniper-System-MIB › juniSystemBootBackupConfigControl
juniSystemBootBackupConfigControl
Module: Juniper-System-MIB
OID (symbolic): Juniper-System-MIB::juniSystemBootBackupConfigControl
OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: System boot backup configuration control is used to determine the configuration to be used when the boot logic chooses backup mode: file - On a system reboot in backup mode use the configuration settings specified by the juniSystemBootBackupConfigFile. If this option is specified, juniSystemBootBackupConfigFile, juniSystemBootBackupReleaseFile and this object must be specified together in the same set request PDU. factoryDefaults - On a system reboot in backup mode use the factory default configuration settings. If this option is specified, juniSystemBootBackupReleaseFile and this object must be specified together in the same set request PDU. none - Disallow the boot logic from using the backup release file and configuration (i.e., disable backup mode).
What is juniSystemBootBackupConfigControl?
This determines what configuration the boot logic uses if it falls back to backup mode: a named backup file, factory defaults, or backup mode disabled entirely (none). Administrators configure it alongside the backup release/config file objects to define a fallback boot path.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.8 snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemBootBackupConfigControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.8.1 snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemBootBackupConfigControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.2.1.1.8.1 i <value>
Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemBootBackupConfigControl OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.2 | juniSystemMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1 | juniSystemObjects | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.1 | juniSystemGeneral | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.1.8 | juniSystemBootBackupConfigControl | Juniper-System-MIB |