Juniper-System-MIB :: juniSystemBootAutoRevertTimeTolerance

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › Juniper-System-MIB › juniSystemBootAutoRevertTimeTolerance

juniSystemBootAutoRevertTimeTolerance

Module: Juniper-System-MIB

OID (symbolic): Juniper-System-MIB::juniSystemBootAutoRevertTimeTolerance

OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.1.12

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The auto-revert reboot time tolerance, used in conjunction with the value of juniSystemBootAutoRevertCountTolerance when juniSystemBootAutoRevertControl is set to set(2) in the same PDU. This object cannot be set to zero, but will contain a zero value when juniSystemBootAutoRevertControl is set to never(1).

What is juniSystemBootAutoRevertTimeTolerance?

This sets, in seconds, the time window used together with juniSystemBootAutoRevertCountTolerance to decide whether recent reboots are frequent enough to trigger an automatic revert to backup boot mode. It's only meaningful when juniSystemBootAutoRevertControl is set to use a custom tolerance.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.12
snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemBootAutoRevertTimeTolerance

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.12.1
snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemBootAutoRevertTimeTolerance.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.2.1.1.12.1 i <value>

Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemBootAutoRevertTimeTolerance OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
1.3.6.1.4.1.4874.2.2.2juniSystemMIBJuniper-MIBs
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.2.1juniSystemObjectsJuniper-System-MIB
1.3.6.1.4.1.4874.2.2.2.1.1juniSystemGeneralJuniper-System-MIB
1.3.6.1.4.1.4874.2.2.2.1.1.12juniSystemBootAutoRevertTimeToleranceJuniper-System-MIB