All MIBs › Juniper-System-MIB › juniSystemBootAutoRevertCountTolerance
juniSystemBootAutoRevertCountTolerance
Module: Juniper-System-MIB
OID (symbolic): Juniper-System-MIB::juniSystemBootAutoRevertCountTolerance
OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.1.11
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The auto-revert reboot count tolerance, used in conjunction with the value of juniSystemBootAutoRevertTimeTolerance when juniSystemBootAutoRevertControl is set to set(2) in the same PDU. For example, if this object is set to 4 and juniSystemBootAutoRevertTimeTolerance is set to 1200, then the boot logic will choose backup mode if 4 system reboots occur within 20 minutes. This object cannot be set to zero, but may contain a zero value when juniSystemBootAutoRevertControl is set to never(1).
What is juniSystemBootAutoRevertCountTolerance?
This sets how many reboots within the paired time-tolerance window will trigger an automatic revert to backup boot mode, when juniSystemBootAutoRevertControl is set to use a custom tolerance. For example, a value of 4 paired with a 1200-second time tolerance reverts to backup mode after 4 reboots within 20 minutes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.11 snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemBootAutoRevertCountTolerance
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.11.1 snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemBootAutoRevertCountTolerance.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.2.1.1.11.1 i <value>
Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemBootAutoRevertCountTolerance OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.2 | juniSystemMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1 | juniSystemObjects | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.1 | juniSystemGeneral | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.1.11 | juniSystemBootAutoRevertCountTolerance | Juniper-System-MIB |