All MIBs › Juniper-System-MIB › juniSystemBootAutoRevertControl
juniSystemBootAutoRevertControl
Module: Juniper-System-MIB
OID (symbolic): Juniper-System-MIB::juniSystemBootAutoRevertControl
OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The system boot auto-revert control is used to determine when the boot logic should choose backup mode based of the reboot history: default - Use the default auto-revert tolerances: 3 reboots in 30 minutes. never - Never auto-revert to backup mode. set - Use the auto-revert tolerances specified by juniSystemBootAutoRevertCountTolerance and juniSystemBootAutoRevertTimeTolerance, which must be specified in the same PDU as this object when this value is specified.
What is juniSystemBootAutoRevertControl?
This controls when the boot logic should automatically fall back to backup mode based on recent reboot history: using default tolerances (3 reboots in 30 minutes), never reverting, or a custom tolerance defined by the paired count/time objects. It protects against a bad configuration causing an endless reboot loop on the primary image.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.10 snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemBootAutoRevertControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.10.1 snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemBootAutoRevertControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.2.1.1.10.1 i <value>
Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemBootAutoRevertControl OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.2 | juniSystemMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1 | juniSystemObjects | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.1 | juniSystemGeneral | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.1.10 | juniSystemBootAutoRevertControl | Juniper-System-MIB |