All MIBs › Juniper-System-MIB › juniSystemAbatedMemUtilThreshold
juniSystemAbatedMemUtilThreshold
Module: Juniper-System-MIB
OID (symbolic): Juniper-System-MIB::juniSystemAbatedMemUtilThreshold
OID (numeric): 1.3.6.1.4.1.4874.2.2.2.1.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The value of memory utilization in the primary system processor that is used to determine when to send an abated memory utilization event notification to the management entity on this system. The abated memory utilization event occurs if a high memory threshold reset has not occurred since the last high memory threshold event, and then the memory utilization falls to or below the value of this object. The abated memory utilization event then triggers a high memory threshold reset.
The value of this object must always be less than the value of juniSystemHighMemUtilThreshold.
What is juniSystemAbatedMemUtilThreshold?
This sets the memory-utilization percentage that memory usage must fall to or below, after a high-utilization event, before an abated (recovered) memory event is sent and the high-threshold alarm can re-arm. Its value must always be less than juniSystemHighMemUtilThreshold, and it defaults to 75 percent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.6 snmpwalk -v2c -c public <target> Juniper-System-MIB::juniSystemAbatedMemUtilThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.2.1.1.6.1 snmpget -v2c -c public <target> Juniper-System-MIB::juniSystemAbatedMemUtilThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.2.1.1.6.1 i <value>
Start monitoring Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-System-MIB::juniSystemAbatedMemUtilThreshold OID value, configure state conditions and alerts, and monitor any Juniper E-series router, ERX/ES2, JUNOSe (system inventory/software/memory health) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.2 | juniSystemMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1 | juniSystemObjects | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.1 | juniSystemGeneral | Juniper-System-MIB |
| 1.3.6.1.4.1.4874.2.2.2.1.1.6 | juniSystemAbatedMemUtilThreshold | Juniper-System-MIB |