All MIBs › Juniper-PPPOE-MIB › juniPPPoENextIfIndex
juniPPPoENextIfIndex
Module: Juniper-PPPOE-MIB
OID (symbolic): Juniper-PPPOE-MIB::juniPPPoENextIfIndex
OID (numeric): 1.3.6.1.4.1.4874.2.2.18.1.1.1
Node type: OBJECT-TYPE
Type: JuniNextIfIndex
Access: read-only
Description: Coordinate ifIndex value allocation for entries in juniPPPoEIfTable.
A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended.
Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
What is juniPPPoENextIfIndex?
Reading this object returns the next available ifIndex value to use when creating a new entry in the PPPoE interface table, or zero if none is available; successive reads return different values so multiple managers creating interfaces at once don't collide.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.18.1.1.1 snmpwalk -v2c -c public <target> Juniper-PPPOE-MIB::juniPPPoENextIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.18.1.1.1.1 snmpget -v2c -c public <target> Juniper-PPPOE-MIB::juniPPPoENextIfIndex.1
Start monitoring Juniper E-series broadband edge router (PPPoE interfaces/subinterfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-PPPOE-MIB::juniPPPoENextIfIndex OID value, configure state conditions and alerts, and monitor any Juniper E-series broadband edge router (PPPoE interfaces/subinterfaces) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.18 | juniPPPoEMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.18.1 | juniPPPoEObjects | Juniper-PPPOE-MIB |
| 1.3.6.1.4.1.4874.2.2.18.1.1 | juniPPPoEIfLayer | Juniper-PPPOE-MIB |
| 1.3.6.1.4.1.4874.2.2.18.1.1.1 | juniPPPoENextIfIndex | Juniper-PPPOE-MIB |