All MIBs › Juniper-HDLC-MIB › juniHdlcIfForceDteAck
juniHdlcIfForceDteAck
Module: Juniper-HDLC-MIB
OID (symbolic): Juniper-HDLC-MIB::juniHdlcIfForceDteAck
OID (numeric): 1.3.6.1.4.1.4874.2.2.9.1.2.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: The force DTE acknowledge setting. This object is only applicable to HDLC interfaces directly over a high speed serial interface (HSSI). This is set to force Cisco compatibility mode, and is only valid when the lower interface is configured for internal (DTE) clocking.
At creation, if a value for this object is not specified, a default will be chosen that is suitable for the type of lower interface on which this interface is stacked. If the lower interface is not HSSI, then the default value will be forceDteAckUnsupported(0); if the lower interface is HSSI then the default value will be forceDteAckNormal(1).
What is juniHdlcIfForceDteAck?
This enumerated value sets the force DTE acknowledge behavior on this HDLC interface, applicable only over HSSI and only when the lower interface uses internal (DTE) clocking, forcing Cisco compatibility mode. Admins enable forced mode to interoperate with Cisco HSSI equipment that expects this nonstandard acknowledgment behavior. On an HSSI-backed interface the default is forceDteAckNormal(1), leaving standard acknowledgment behavior unless switched to forced mode.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.9 | juniHdlcMIB | Juniper-HDLC-MIB |
| 1.3.6.1.4.1.4874.2.2.9.1 | juniHdlcObjects | Juniper-HDLC-MIB |
| 1.3.6.1.4.1.4874.2.2.9.1.2 | juniHdlcIfTable | Juniper-HDLC-MIB |
| 1.3.6.1.4.1.4874.2.2.9.1.2.1 | juniHdlcIfEntry | Juniper-HDLC-MIB |
| 1.3.6.1.4.1.4874.2.2.9.1.2.1.10 | juniHdlcIfForceDteAck | Juniper-HDLC-MIB |