Juniper-HDLC-MIB :: juniHdlcIfClockRate

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Juniper-HDLC-MIB › juniHdlcIfClockRate

juniHdlcIfClockRate

Module: Juniper-HDLC-MIB

OID (symbolic): Juniper-HDLC-MIB::juniHdlcIfClockRate

OID (numeric): 1.3.6.1.4.1.4874.2.2.9.1.2.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-create

Description: The clock rate setting for this HDLC interface. This object is only applicable to HDLC interfaces directly over a high speed serial interface (HSSI).

At creation, if a value for this object is not specified, a default will be chosen that is suitable for the type of lower interface on which this interface is stacked. If the lower interface is not HSSI, then the default value will be hdlcClockRateUnsupported(0); if the lower interface is HSSI then the default value will be hdlcClockRate44At736Mhz(2).

What is juniHdlcIfClockRate?

This enumerated value sets the clock rate for this HDLC interface, applicable only when it runs directly over a High Speed Serial Interface (HSSI): unsupported, 34.368 Mbps (E3), or 44.736 Mbps (T3/DS3). Admins select the rate matching the physical circuit's actual speed to establish correct HSSI signaling. On an HSSI-backed interface the default is hdlcClockRate44At736Mhz(2), matching a T3-speed circuit unless changed to the E3 rate.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.9juniHdlcMIBJuniper-HDLC-MIB
1.3.6.1.4.1.4874.2.2.9.1juniHdlcObjectsJuniper-HDLC-MIB
1.3.6.1.4.1.4874.2.2.9.1.2juniHdlcIfTableJuniper-HDLC-MIB
1.3.6.1.4.1.4874.2.2.9.1.2.1juniHdlcIfEntryJuniper-HDLC-MIB
1.3.6.1.4.1.4874.2.2.9.1.2.1.9juniHdlcIfClockRateJuniper-HDLC-MIB